LED Controller

Model: DT-CT-24-01
Description:
Operation Instructions of Controller
I. Specifications:
Working temperature: -20-60                     Supply voltage: DC12V
Product size: L62�W35�H23mm                   Net weight: 50g                                  
Output: Three CMOS drain- open output            Connecting Mode: Common anode
Max load current: 2 A each color    
 
II. Control Method:
Adopt IR remoter to control the led controller, which has 24 buttons, the function of each button as the table below:     
Direction: press static color every time, the matching mode flicker two times before stopping, then recover the static color. When switching to four dynamic mode (7 color jumpy change, All fade out & fade in, 7 color fade change, 3 base color jumpy), the button of Brightness / Brightness - means the speed of light change is up/ down, there are 32 step in all.
 
III. Warning:
1. Supply voltage of this product is DC12V, never connect to DC24V or AC220V.
2. Lead wire should be connected correctly according to colors that connecting diagram offers.
3. Warranty of this product is one year, but exclude the artificial situation of damaged or overload working.